Reset Windows WINSOCK and TCP/IP Stack Entries For Better Browsing

What is the command to do a winsock reset in Windows?

Many Internet connectivity problems are caused by corrupt winsock settings. Windows sockets settings may become corrupted due to a Networking software installation and such as spyware. A winsock reset restores Windows Socket settings to defaults, which may help to restore connectivity to the computer. To do a winsock reset in Windows XP, open a command prompt and type in:


Reset Winsock (XP)


1. Click Windows Start, then click Run.

2. In the Open: field type CMD, then click OK. The Windows Command Console (black DOS window) will appear.

3. At the blinking cursor, type netsh int ip reset c:\Reset.txt

4. Press Enter on the keyboard.

5. At the blinking cursor, type: netsh winsock reset

6. Press Enter.

7. At the blinking cursor, type: exit. This closes the Windows Command Console window.

8. Restart your computer.


To reset Winsock in Vista/7/8:

1.Click the Windows Start button.

2. Type Cmd in the Start Search text box and press Ctrl-Shift-Enter (keyboard shortcut to run Command Prompt as Administrator). Click Continue to allow elevation request.

3. Type netsh winsock reset in the Command Prompt shell, and then press the Enter key.

4. Type netsh int ipv4 reset in the Command Prompt shell, and then press the Enter key.

5. If you use ipv6, type netsh int ipv6 reset in the Command Prompt shell, and then press the Enter key.




Give thanks okie.,.,.

Quote:

enjoy! http://199.91.154.51/qqcy0qdpt5dg/j4...1-2-8-1288.zip

++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++

Enabling you IPv^6 thru Interface
]

Go to Network Properties

This image has been resized. Click this bar to view the full image. The original image is sized 800x600.

Right click on the device/interface-> properties



Click Install



Click on protocol..



Choose IPV6.



ipconfig shall reveal your ipv6 ips



test to ping ipv6 destination.



.. or use http://test-ipv6.com/ to test.

hmm.. the shortcut to all above click-and click.
is. open up command prompt.

But windows XP doesn’t support IPv6 DNS usages.. *sigh*.
windows 7 onward only can define IPv6 DNS..

but you can still use the recursive DNS server on IPv4 that support IPv6 query.

Idea VPN Trick Working April 2012 [PC and for Mobile also]

Hello guys..
After Airtel, BSNL, Vodafone and Reliance..
IDEA is next to be hacked..

So, here today I present you all latest IDEA VPN Trick which is working from many months..


TRICK IS SIMPLE, JUST FOLLOW THE STEPS

1. DOWNLOAD OPENVPN (LATEST ONE) IF U DON'T HAVE ALREADY. ( Go to openvpn.net )
2. IF U'VE 2G PACK THEN USE IT COMPLETELY AND DO 3G RECHARGE TO GET 3G SPEED
3. DOWNLOAD CONFIG ATTACHED FOR USING IT IN OPENVPN
4. GET YOUR ACCOUNT ID AND PASSWORD FOR TSUNAMIVPN AND PEOPLESVPN IF U DONT HAVE ALREADY FROM HERE:

http://www.tsunamivpn.com/index.php/account/free-trial/register

http://173.208.213.22/register.php


TRICK BEGINS HERE

1. CONNECT TO NET USING mmsc APN
2. AFTER THAT CONNECT TO "PeoplesVPN - Idea" or "Tsunami" FROM OPENVPN
3. IT'LL TAKE LITTLE TIME TO CONNECT BUT IT'LL CONNECT FOR SURE (IN KARNATAKA)
4. ENJOY FREE NET


NOTE
1. IF NOT CONNECTING OR TCP TIMEOUT RETRY.
2. IT WORKS GREAT AT NIGHT TIME ONLY AS IT GIVE VERY VERY SLOW SPEED IN DAY TIME.


BALANCE CONDITION: Try at 0 first if not connecting then try at Rs.7 balance..

U can try for this APN too but at your own risk:
"imis"

You all can use this config in Android mobiles too if u know how to use it using openvpn binary and openvpn settings..


FOR USING IT IN MOBILE

Just create new settings:

APN: mmsc (recommended) or imis (your risk)
proxy: 10.4.42.15
port: 8080
HP: Any of below:

https://12345proxy.net
https://sneakme.net
https://sslpro.org
https://proximize.me/
https://www.interrobangpath.org/
https://km-proxy.de/

or any site that have ssl or https support..


Put it in OpenVPN config folder, add your account in respective text files..

Enjoy the trick..

BSNL launches Pentel T-Pad IS701C at Rs.4,999

Pantel Technologies Private Limited (PTPL) has launched an Android tablet PC named IS701C in the Indian market. PTPL has a reverse bundling alliance with the government telecom organization BSNL to reach to the remote areas of India and cater to the masses. Pantel Technologies has earlier this year launched three tablets in partnership with BSNL with much success. The BSNL T-Pad IS701R and BSNL T-Pad WS704C are 7-inch tablets with a price tag of Rs.3,250 and Rs.10,999 respectively, whereas the 8-inch BSNL T-Pad WS802C sells at Rs.13,500. The tablets, which received a lot of appreciation from the masses, managed to get over 1 lakh pre-order bookings. Mr. Vijender Singh, Managing Director, Pantel Technologies Private Limited said at the launch, “We are committed to deliver an excellent user experience and aspire to bridge the digital divide which is so evident in our country. Our tablet is loaded with a variety of interesting features which are fine tuned to our consumers’ demands. Our latest product is a testimony to the months of hard work by our research and development team dedicated to bringing the latest tablet at an affordable price of INR 4,999.”.

Pantel T-Pad IS701C Specifications:
• Cortex A8 1GHz processor
• 7-inch 800X480pixel TFT LCD
• 0.3 MP front camera
• Android 4.0
• 512MB DDR III RAM
• USB 2.0 port
• 4GB of internal storage
• 720p HDMI port
• Wi-Fi connectivity, 3G dongle support.

BSNL is Bouncing Back - Report Voice & Data

State run PSU Bharat Sanchar Nigam Ltd (BSNL) finally gets a better news when one of leading Magazine Voice and Data reported at turn-around in company during current Year.

 In coming days BSNL may back in Business after recent Cost cutting measures and ITS absorption issue about to end after more than 12 years in coming days. It was a make-or-break year for BSNL but the company fared very well. On revenue terms, the company has shown a drop in revenue from `29,688 crore in FY11 to `28,447 crore in FY12 but on the PAT (profit after tax) front, the company has improved significantly by netting `8,347 crore vis-a-vis `6,384 crore in FY11. The company has done extremely well on mobile and NLD services. On the mobile front, the company has increased its revenue by 31% to net `6,482 crore. With respect to NLD services, the company has increased its revenue by `698 crore to net `5,646 crore. 

On mobile services, the company is doing extremely well and 3G services are now available in 963 cities and the services is available to all its mobile customers. Presently, non-voice contributes around 13% of the overall mobile revenue and the company plans to increase it by entering into non-exclusive agreements with VAS players.  On the capex front, the company has invested `5,000 crore in FY12 for ongoing GSM, broadband, and fiber-to-the-home projects but this year the company plans to invest `9,086 crore and more focus is on mobile and broadband services. Recently, BSNL has finalized 10.15 mn GSM line order to ZTE worth `3,200 crore for northern and southern zones.

PortForwarding for RATS 2012

PortForwarding
Q: So, what is portforwarding?
A:Port forwarding allows remote computers, for example, computers on the Internet, to connect to a specific computer or service within a private local area network (LAN)
so lets start portforwarding

remember that your the port that you have choosen is 100.
to make it easier.lets download the simpleportforward tool from this site:

http://www.simpleportforwarding.com/download
now, once it is downloaded,run the program.

1)firstly update yor router list and set your router.


and press the "choose which port you need to forward" by pressing the "do it now"
and press the "add custom"
type
name:anything
type: tcp/udp
start port:99
end port:100
and then press "add"


now click "update router"


when you have pressed update router, you can see the program accessing your router and editing whatever you have typed just now.
and now the last step, which is to check whether your port 100 is open or not.
but before that close your cybergate program.
and now do like in the below picture


if the portforwarding is failed, then you have to start from the beginning of portforwarding
==
now,you have done it.
what you have to do now is spread your server.

Tinychat Name Cloning (Step-by-Step With Pics)

Tools Required:
Wpe Pro
Opera Web Browser (easiest to use 4 this method)

Step 1:
You will need this site to convert text to hex
http://www.swingnote.com/tools/texttohex.php

Step 2:
open Opera and navigate to a Tinychat room and find a target name you wish to clone or boot.

Step 3:
When the name is found, put it in the text2hex site and press convert.

Step 4:
You are going to want to copy the "Hex Spaced".

Step 5:
Go to Filter 1 and check it then double click to open it.


Step 6:
Under "Mode" select 'advanced' and under "Start modifying from" select 'from the position of the chain found'.


Step 7:
Where it says "Offset Modify", place the copied 'Hex Spaced' data on "000".


Step 8:
Where it says "Offset Search", Now this is key, for every character in the Victims name, there must be the same hex value in the search box. when finishes hit apply. (Example: I use 30 for my filter which equals 0. The name bong is 4 characters, therefore i would put 30 30 30 30 in the search section).


Step 9:
Click "Target program" and select the Opera browser.

Step 10:
Refresh the room and when it comes time to put a name in remember this, every character of targets name must match so if we cloned the name bong we would enter 0000...in my case it's more lol.


Step 11:
Now that we are logged in with our 0 name we go back to Wpe Pro and click then 'ON' button


Step 12:
Back in Opera we double click on our 0 name in the tinychat room list and when it comes up to change it we don't, simply hit GO.


Now the name is completely cloned, when you type it will show up as 00 but if you open another tab in the same room you will see it types under the targets name.

Hope this was an informative tutorial. Took me over an hour of my time to write so show some love.

Uninor Free Caller Tune (MH)

Hello Guys ,

Here is the Trick Working for me in MH ..

1) Dial 50001
2) Select 1
3) Then Select Your catog. Like New songs , Evergreen Songs ..
4) Listen to the song & To go next song press 1
5) Then Press 5 to Select Specific song

Done

Caller Tune Will be successfully activate on your number

Enjoy

NOTE-
KEEP BALANCE LESS THAN Rs. 1

Live India VS Sri Lanka Match For All Mobile Network

Given Link it providing live telecast of india and srilanka 2012 and for pc www.zengatv.com


rtsp://23.21.104.244/zengalive/150901250450150250901150901901170511cricket_2g.sdp

Enjoy

Cain & Able - Pull IPs - Noob Friendly w/pics

Pull IPs with Cain & Able

Difficulty: Easy

Your Xbox and PC should be connected to the internet through the same router for this.

Disable Anti-virus and Windows Firewall

Windows 7
Control Panel > System and Security > Windows Firewall > Customize Settings

Download, Install, and Run

Download Cain & Able by clicking THIS

• Use the second link to download.
• Click save to download.
• Run the set up and install the WinPcap 4.1.2 adapter.
• After you are finished, right-click the Cain & Able shortcut on the desktop and 'Run as administrator'
  

Configurations

• Click the sniffer 'button' at top left.
• Select the one that says 192.168.*.*
• Click Apply, then click ok.
  

Scan MAC addresses for Hosts on the network

• Click the Sniffer 'tab' and the sniffer 'button'.
• Make sure everything looks how I have it here.
• Click the blue cross and click ok to scan for hosts.
  

Now you should atleast see your router and Microsoft.

APR Poison Routing

• Now click the APR tab at the bottom.
• Click and drag inside the top grid and let go.
• Click the blue cross.
  

• Click 192.168.1.1 (router IP) on the left side
• Click 192.168.1.118 (Microsoft) on the right side
  

Show Time
Click the yellow nuke looking icon to start the APR and you are now pulling IPs. :)

This is my first tutorial and I hope it helps some newer members here that want to learn to use Cain and Able for this purpose.

I would appreciate any criticism on the layout or necessity of this thread be PM'd to me.

Enjoy!

Learn more about Crypters!

Hello everyone!

This is my new tutorial for CoderTrick, its noob friendly! Well you going to learn more about Crypter-stub connection. It's really easy & basic, but some people asking how they work. That's why I made this tutorial, lets start

What's Crypter?

Crypter's are programs used to encrypt your virus server and make it FUD from Anti-Virus software's. You can find many free crypter's, here on HackForums that are FUD. Crypter's can be coded in different programming languages: Visual Basic .NET, Visual Basic 2006, Delphi, C++ etc.

Crypters works something like this:

You open Crypter.exe, then choose Server and then click crypt button.

What do I need to know about crypter?

Well, very important thing about crypter is Stub. Stub must be in same folder with crypter or it won't crypt it.

I Builder - Crypters builder is used to encrypt the selected file. Some crypters can be Runtime and some Scantime only. Runtime FUD are Fully Undetected from Anti-Viruses when you run the crypted server and AV doesn't detects. Scantime is when you scan it with Anti-Virus.

II Stub - Crypters builder use Stub to encrypt & split builders data with stub and make new FUD-ed file.

III EOF - EOF aka. End-Of-File support means that your crypter can work with End-Of-File server's. Some server's will just crash or won't work when you crypt and if your crypter doesn't support EOF it won't end the terminal unless End-Of-File ends it.

IV Scantime - Scantime crypter is crypter that is FUD from all Anti-Viruses when you scan it. But it will be detected when you execute crypted scantime server, so its important to have RunPe module (read down).

V Runtime - Runtime crypter is crypter that is FUD when you execute your crypted file. Runtime crypter use RunPe module, which inject your Virus with some process from TaskMangr and make it fully un-visible from TaskManager process list.

Encryption Algorithms?

This is list of famous Encryption algorithms & encrypted text example:

• RC4 - 07 B3 44 70 A9 EC 18 8A 15 F3 95
• TEA - T)’1c â&Ý7| nÄòäœP›Ûw z\ËւLE–í1ûZ mGJžŠ$U [ñÃÏn
• DES - � "Hɼ��L�/�V ����ȵ�z�
• XOR - 8b2f56c9ab1fd6cf17e590706f35bae4a3d083fceb0423a311
• BlowFish - U�9 m9�Nkm��f;/�~��D��
• TwoFish - ��}q �� MlH m*�# �{ MDr*|_��
  

Tips & Suggestions

You bought FUD private crypter. You want to stay FUD for long time, then you will need to:

- Scan on NoVirusThanks.org only and make sure you checked Do not distribute the sample and then start with scan.

- Do not share your crypter with anyone or release it to public.

- Do not scan on Virustotal.com ~ Why? Well, Virustotal send every file you scan to AV companies and that will make your crypter UD.

- Do Not Scan on virusscan.jotti.org ~ Why? Same reason, they also distribute a sample.

How to Login in Facebook without Getting the Security Question 100% work

You got someone facebook id and password. If you try to login to that account from your your system, it will ask to answer security question. You can bypass this security.
Requirments:
slave IP address

* Go to http://www.ip2location.com
* and enter the IP address.
* It will show the country of slave.
* Now visit:
* http://www.samair.ru/
* Find the proxy IP address based on the slave's Counry.
* Set the proxy IP in mozilla
* Now login to facebook with id you got. you won't get Security
Question now.

Downloading from $harecash(spam) - Sandboxie method [Free][Any Country]

For all the people who have trouble with the surveys on $harecash, here's a way to download that works for me almost every time. This may or may not work on other survey sites.

What you'll need:

• A VPN if outside the US (Free US VPN + tutorial here, be sure to post a comment saying thanks if you use it)
• Sandboxie (Download here)
  

Step 1:
Download and install Sandboxie.


Step 2:
After installation, the Sandboxie window should come up. Close any prompts that may come up, right click 'Sandbox DefaultBox', and select 'Run Sandboxed>Run Web Browser'. A new window with your default browser will come up.



If Firefox gives you an error 'Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.', just try opening it through Sandboxie again and it should work. You can tell that Firefox is running sandboxed when you see a pair of '[#]' around the window name in your taskbar.



Step 3:
Copy and paste your link into the Sandboxed browser. When you see the infamous 'Complete a Quick Survey to Continue!' box, there should be at least one option to download some sort of game or toolbar. A lot of the time they don't go right out and say that it's a download just from the description, but ones that usually don't ask for your opinion/personal info are the download ones. If you're not sure, just click on them to check. I'm going to do the 'Blow up all the balloons' one.
NOTE: I haven't had success with the 'Super Mario Games'.



Step 4:
On the new page, click the Download or Play Now button for whatever page $harecash sent you to, and download the file.



If Sandboxie brings a prompt up asking to recover files out of the Sandbox, click 'Close'.



Protip: If your antivirus is giving you trouble, just disable it. You'll still be safe, as Sandboxie keeps it in a contained environment.

Step 5:
Run the file from the browser and before going on with the installation, ensure that you're running it sandboxed by looking for those '[#]' in the window name like we did before.



Go on with the installation. I recommend that you uncheck any offers to install software that's unnecessary to going through the installation. It won't hurt anything if you do, but it just takes longer.



Step 6:
Now that you've completed the installation, a page may open up, and $harecash should detect that you've installed it.



This time, however, when you download the actual file you were trying to, select 'Recover' when the Sandboxie prompt comes up.



Step 7:
Now, to clean everything up, we're going to go to the Sandboxie Control, right click, and select 'Delete Contents'. Select 'Delete Contents' on the next prompt and anything in the Sandboxie process tree should close. Now you're clean!



I hope this helped. And to those who always complain about $harecash, please remember that there are people working hard to make those programs you love, and $harecash is an incentive for them to keep it free.