Tata Docomo 3G in 2G plan - 2012 HACK

Yet another loophole in Tata Docomo's systems that went unnoticed and can be easily exploited to obtain 3G speed even when you've subscribed to a 2G plan.

Follow the steps carefully:

1. Recharge your mobile for the lowest 3G pack available. In my area, it is  the Rs.9 plan which provides 10MB of 3G usage. To find what is the lowest pack in your area, you may dial *141#  and select 3G internet.
2. Once you're subscribed to the lowest 3G pack, connect the internet using the access point named TATA.DOCOMO.INTERNET. If you don't have the settings, SMS INTERNET to and save the settings as default. 52270
3. Using the default browser of your phone, just load your homepage; for instance www.google.com. You will see the page loading in 3G speed since it is connected to 3G or H tower.
4. Now the trick begins; With the internet connected, just dial *141# and select the 2G internet recharge packs. Select the most suited one for you. It ranges from Rs.5 (50Mb) to Rs 65 (2.5GB) or even above. Then your GPRS plan get changed, but still will be connected to 3G tower itself..!
5. If you select Rs.5, then your gprs data remaining will be 50Mb. So, in total for 9+5= Rs.14, you get 50Mb 3G internet. Think if you recharge for Rs.65, then for 9+65= Rs.74, you will get 2.5Gb internet in 3G speed..!!

Note some of the precautions you should take:

• Your account should have enough balance for the two recharges mentioned. For example, if you want 2.5Gb internet, you should have at least Rs.75 balance. If you want 50Mb, you should have a minimum balance of Rs.15.
• If the connection gets cancelled due to any reasons, do not continue, since the tower might get exchanged.
• Don't use this trick if you are travelling since the tower may get exchanged.

IDea 3G at Re.1 - promotional offer exploited

Hey friends!, I am sharing the cheapest 3G pack of all times

Follow these simple steps:
1. Activate 3G By Sending msg ACT3G to 12345
2.Then send SMS ACTNET1 to 12345. You will get 100mB for 15 days
3. Here's a screenshot


4. I'm sure 100 data will be consumed before 15 days. In that case, just repeat the steps again and you'll get another 100MB for Re.1.

BSNL launches Aakash Tablet's Rival at Rs.3250

An India 3G mobile service provider Bharat Sanchar Nigam Ltd (BSNL) today announced the launch of 3 Android powered Tablets including two 7 inch resistive screen based tabs (WiFi and 3G) and one 8 inch capacitive touchscreen Tablets in association with Pantel Technologies.

All 3 Tabs are made by Noida – India based company Pantel, the tablets will be bundled with special offer with 3 Months of free 2G/GPRS data usage as well as discounted 3G data plans from BSNL. The three tablets are priced at Rs. 3250, Rs. 10,999 and Rs. 13,500.All the three tablets come with 1 year warranty.

The BSNL Penta T PAD IS 701R is a low cost entry level tablet solution priced at Rs. 3250 powered by Google Android 2.3 OS.
It comes with a high resolution 7” resistive touch screen (TFT Display) coupled with a powerful 1GHz processor and inbuilt 256 MB RAM and 0.3MP camera.



This tab is WiFi enabled and supports USB 2G/3G Dongle so one can browse Internet over GPRS/3G and WiFi to watch Youtube videos, check e-mail, read E-Books and much more with Android Apps. The built in 2GB memory can be expanded upto 32GB using the onboard TF Card slot.

BSNL T-Pad WS704C is 7 inch 3G Tab priced at Rs. 10999 powered by Android 2.3 OS. With this Tab one can browse the Internet over WiFi or through the inbuilt 3G HSPA SIM card slot using their BSNL 3G Sim card. This tab equipped with a powerful 1GHz processor and 512MB RAM.

It supports all popular video, music, and photo formats. The tablet also offers HDMI port (1080P & 720P) through which it can be connected to a TV..

The WS704C has 4GB of built-in internal memory and features a microSD card slot for upgrading the capacity to up to 32GB.
. It comes equipped with a built-in front 0.3Mp and 2 Mega Pixel Rear camera, GPS, Accelerometer, Bluetooth and microphone. The Tab has a Polymer 4000 mAH battery.

BSNL T-Pad WS802C 8 inch Android Tablet is priced at Rs. 13500
13500 Powered by a 1.2 GHz processor and 512 MB RAM while rest of the features like GPS, camera and Bluetooth are same as the Penta T PAD WS704C.

Comprehensive Link for all the tablets is here…

CLICK HERE FOR THE TABS

BSNL customers can buy all these Tablet from Pantel Technologies. For more details dial 1800 103 7739 (Mon to Sat, 9 am to 6 pm).

Pre – book The Tablets From Here… LINK 1

Pre – book The Tablets From Here… LINK 2

SEE THE COMPARISON IN BELOW SS

BOX: Access 50GB Of Online Data For Free

Box is one of the leading online file storage systems, which was founded by Aaron Levie, Co-founder & CEO on a simple and powerful idea.

The goal behind this is that people should be able to access and share their content from anywhere. Past 7 years, Box has helped more than 8 million individuals, small businesses and Fortune 500 companies for simple secure sharing content.

Okay, so you guys might think what’s the use of BOX?

Access, create and view content on your Android phone or tablet

Upload multiple images, videos and files from the SD card

Save files to your SD card for offline access

Easily share files and folders with links

Invite friends/colleagues to shared folders and leave comments on files for them

Fast search

Save and edit or create in other Android apps to your Box account
Add a widget to your home screen

If you own Android phone or tablet, this app might certainly help you for easy access and share of data with your friends and colleague which is 100% secure.

So here, here is good news for Android and Tablet users, Box is giving out 50GB of free lifetime data storage for those who are registering on or before March 23 2012. You can download app version 1.6.0 (3df6f15) from Android Market. So guys, this is the good opportunity to grab 50GB of data storage for free. 50GB is really worth lot more you can do with it.

HOW TO GET WI-FI EVERYWHERE ON YOUR iPOD TOUCH, iPAD, OR iPHONE

Today, I will be showing you how to create and use your very own custom wi-fi Hotspot on your iPod Touch, iPad, or iPhone within a 100 mile range of your home computer!!! This hack works on ALL GENERATIONS of the iDevices listed above and NO JAILBREAK is required! Before we begin, I just want to say that some people don't believe this is possible, but if you would like to reverse engineer the program, feel free. Also, this program took a group of 4 people about 3 months to create. The way this program works is once you download the program and inject the custom made wi-fi Hotspot onto your iDevice, it takes your home connection and puts the settings of your router in iCloud (The Memory Storage in the Cloud, not on your computer) and gives off the connection to the unique UDID of your iDevice and let's you use your home connection internet within a 100 mile range. The farther away you are from your house, the WORSE the connection is, the closer you are to your house, the BETTER your connection is on your iDevice. With that being said, let's begin:

TEXT TUTORIAL

STEP 1. Download iDevice Wi-FI Hotspot Builder HERE
(We put our download links on $harecash to prevent from leechers. It took a LOT of time to code and create, so you can at least download from $harecash.)

2. Connect your iDevice into your Computer.

3. Open up the program you just downloaded and choose the name of the wifi hotspot you want to create.

4. Choose the password of the wifi hotspot you are creating(If you don't want a password, then don't type anything).

5. Choose how many people can use the wifi hotspot other than yourself.

6. Click 'Next'. Then click 'Save wifi hotspot settings onto my Device.'

7. Wait for the program to finish putting the hotspot files onto your iDevice and to finish uploading the files onto the online server (iCloud).

8. After that has been done, you need to reboot the plugged-in device.

9. Then, Sign in to the wifi Hotspot that you created on your iDevice.

10. Once you have finished doing all the above steps, you
can use your own wifi hotspot on your iDevice anywhere within 100 miles of the computer you set up the wifi hotspot on (Your home connection).

NSN HSPA+ Multiflow – Lets One Device Connect to Two BTS Simultaneously

Nokia Siemens Networks and Qualcomm introduces the world’s first “HSPA+ (4G) Multiflow” which may offer Data Rates Upto 600 Mbps and also provide some relief from depressed data network connectivity while on move.

Known as HSPA+ Multiflow, it allows devices located close to the edge of a mobile base station’s cell to connect with a second /another base station serving a neighboring cell. The ‘Multiflow’ name refers to the two different paths data can then take to reach a device.

The feature makes far more efficient use of network resources, delivering up to double the data speed up to 600 Mbps and up to 50% faster response compared to existing HSPA+ 4G networks.

100 million smart devices being added every month and the consequent increase in ‘smart’ applications are leading to the increase in unpredictable data traffic. There is a need for operators to look at how they can tackle this traffic growth, by using network resources efficiently to deliver a better mobile broadband experience.

The HSPA+ Multiflow feature is expected to be 3GPP standardized by mid 2012, and will be available commercially from Nokia Siemens Networks by second half of 2013.

[PERL] How to Setup your Anti-DDoS Script [VPS Ubuntu, Debian, Windows]

Hello,
In this tutorial i show you how to setup a perl anti ddos script,
Ok well first what you need is the Anti-DDoS Script.
I posted a nice one, to bear up against 25.000 Connections.

Link for the Thread:
[Protection] Anti-DDoS Script, over 25k connections.


Link for Putty:
-Download Putty for Windows :)
-Download Putty for Linux :)

Create the perl script !, Note: save it as .pl :).



[Installing Perl]
----~Debian~--
If you are using Debian, Perl should already be installed. If not, the required package is simply: perl
--

----~Ubuntu~--
Go to Putty and type in: sudo apt-get install perl perl-modules perl-base perl-doc
--

----~Windows~--
Windows Server, this is not so easy.

1) Open IIS 6.0

2) Click on the name of your computer -> click on "Web Service Extensions" and one can view few links.
One of them says "Add a new Web service extension...", click on that link.

3) In that window it will ask for the extension name one can put anything, like "CGI script" and under the
"Required Files" section put 'C:\Perl\bin\perl.exe "%s" %s' click OK to the notification,
click "Set status to allowed" and press ok.

4) Now, one need to go at command prompt and "md c:\inetpub\cgi-bin" [without quote].

5) Now go back to the IIS Manager and right click on Default Web Site highlight "New" in the pop-up menu
and click "Virtual Directory..." in the new menu.

6) Click next then as an alias put "cgi-bin" and click next then as a path for the next dialog put in
"c:\inetpub\cgi-bin". On the next dialog leave everything checked and checks executes and click next.

7) Click Finish to end the installation wizard.

8) Right-click on cgi-bin directory from default web sites and click on properties.

9) Click Configuration in the lower right-hand area of the dialog and make sure .pl is there (if it isn't, add it the way you see it).

To make the scripts work the line (#!/usr/bin/perl) should now be #!C:\Perl\bin\perl.exe. Any reference to any files
should be changed from /home/user etc, to c:/home/user or c:\\home\\users - note the double back-slashes.
Now, one should be able to run Perl scripts successfully using Windows Server 2003, and IIS 6.0.

--

[Add to Autostart]
----~Debian~--
Put it in /etc/rc<RUNLEVEL>.d/ in a script like:
#!/bin/bash
perl <script>
Chmod +x it and it should work.
To get your current RUNLEVEL, do a runlevel as root.
--

----~Ubuntu~--
On Ubuntu, the simplest way is to add this line to your /etc/rc.local file (before the exit 0 line, substituting username with your own user name):

Quote:su -c "./path/to/script.plstart" username &

--

-I deleted this Windows Part :I

This is all i can tell you about that, if you have more questions ask your best friend google
 

How to see the Password Hidden behind the *

Today i'm going to show you how to see the password hidden behind the asterisk in web browser's.

Example of this method would be on http://www.hotmail.com

Username: example@hotmail.com.com
Password: **

What's the password?

To find out the password paste this java script code in the url bar and press enter :)

Code:

javascript:(function(){var s,F,j,f,i; s = ""; F = document.forms; for(j=0; j<F.length; ++j) { f = F[j]; for (i=0; i<f.length; ++i) { if (f[i].type.toLowerCase() == "password") s += f[i].value + "\n"; } } if (s) alert("Passwords in forms on this page:\n\n" + s); else alert("There are no passwords in forms on this page.");})();

I hope this helps in someway or another enjoy

Hacking PhotoBucket accounts without spending $150 on PBRip

Install python-2.6.6.msi for windows
Goto http://www.python.org/download/releases/2.6.6/

Goto http://pastebin.com/LsR81etQ/f
Save the file as raw, this saves it as a txt file to your PC.
RENAME IT to pb.py

Now find an account you want to hack on some website like 4chan

Highlight the account name.

Copy the highlighted name

Open the file pb.py with a txt editor.



The line you need to edit is like this (bucket_name = 'dreadfuldc')
This is the name of the account you want to hack.



eg. account is http://smg.photobucket.com/albums/v332/harmoniumm17/
so edit to
bucket_name = 'harmoniumm17'

Save file to pb.py



Double click the file pb.py
This runs the programme through python.



A txt file will be created on C:/ drive called harmoniumm17_files.txt

Open this text file with NOTEPAD

Goto EDIT/SELECT ALL this will highlight all the text in blue and then EDIT/COPY


Goto http://zbucket.org/
Click the option VIEW


Paste the txt list here and then click VIEW.


A new page will be created with thumbnails of all the images.

Copy the new url in the url task bar.

This is the url you share with people.

Good luck guys.

Two i found interesting

http://zbucket.org/view.php?k=PWKLA
http://zbucket.org/view.php?k=QaIGs